An automower is one of the easiest ways to keep your yard looking good with hardly any effort. But even though it’s smart and mostly self-sufficient, it still needs a bit of attention to keep it working properly.
Regular maintenance ensures your automower stays efficient, safe, and dependable. Over time, grass, dirt, and weather can affect its performance. Small things like blunt blades or clogged wheels can quickly lead to bigger issues if left unchecked.
It also saves you money in the long run. By keeping up with basic care, you’ll avoid unnecessary repairs and extend the life of the machine. That means less hassle and more value out of your investment.
Whether you’ve got a newer model or an older one, treating your automower like any other garden tool makes a difference. You wouldn’t ignore your lawn mower or chainsaw, so the same goes for your robotic mower. Give it a once-over now and then, and it’ll keep your lawn tidy all season long.
Daily and Weekly Checks for Your Automower
Stay On Top of the Basics
Checking your automower doesn’t have to be a big job. A few simple habits can help keep it running without interruption.
Start with the wheels. These can quickly get packed with grass clippings and soil, especially after rain or mowing on soft ground. A small brush or even an old toothbrush works well to clear out the build-up.
Next, give the sensors a quick wipe. If they’re covered in dust or grass, the automower may not navigate your lawn properly. Use a soft, damp cloth and be gentle around the charging points.
Then take a look at the blades. If they look dull, chipped, or rusty, it’s time to replace them. Sharp blades keep your lawn healthy and evenly cut. Swapping them out every few weeks, depending on usage, is a good rule of thumb.
Lastly, make sure your mower is returning to the charging dock as it should. If it’s struggling to connect or keeps missing the station, it might be time to clean the contacts or check the alignment of the guide wire.
How to Safely Clean Your Automower with the Right Gear
Cleaning your automower the right way is just as important as mowing with it. Always turn it off and remove the battery (if needed) before doing any work.
Use a damp cloth and soft brush to wipe down the body and undercarriage. Avoid using a hose or pressure washer, as water can damage the internal components.
Wearing a lightweight xplorer jacket can help protect you from dirt, splashes, or prickly plants while you work outdoors. It’s handy not just for mower maintenance but also when using a chainsaw or doing heavy garden work.
If you store your tools in a shed or garage, keep a chainsaw bag nearby. It’s great for keeping extra parts, gloves, and cleaning gear all in one place. Staying organised makes regular upkeep quicker and easier.
When and How to Replace Automower Blades
Sharp Blades Make a Big Difference
Blades are the most used part of your automower, and keeping them sharp is key to a clean, even cut. Dull blades tend to tear the grass instead of slicing it neatly, which can lead to brown tips and poor lawn health.
As a general rule, blades should be replaced every 4 to 6 weeks, depending on how often the mower runs and how thick the grass is. If you notice patches of uneven cuts or hear the mower working harder than usual, that’s a good sign the blades are worn out.
Swapping the blades is a quick task. Just make sure the automower is turned off and safe to handle. Always use genuine replacement parts, especially if you’re using a husqvarna mower or similar brand. It ensures safety and the best performance from your unit.
At Nu Tech Mowers, we can supply you with the right blades for your model, along with tips to help you change them safely at home.
Protecting Your Automower in Bad Weather or Off Season
Rain, heat, and frost can all wear down your automower over time. Even though many models are weather resistant, it’s still a good idea to give your mower some extra protection.
During heavy rain, or if storms are on the way, move the automower to a dry place. You can also use a protective cover, especially if it’s stored outside. If you’re putting it away for winter, clean it thoroughly first, dry it off, and store it in a dry, sheltered spot like a garage or shed.
If you already use a chainsaw bag for tools, you’ll know how useful they are. Consider using one to hold your automower’s spare parts, blade kits, or cleaning tools to keep everything organised through the off season.
How Your Husqvarna Mower and Automower Work Together
Smart Lawn Care with the Best Tools
Even if you have an automower, there are times when a standard husqvarna mower comes in handy. For example, trimming edges, tackling long grass after a wet spell, or cutting areas the robot can’t reach.
Using both gives you complete control over your garden. The automower can handle daily maintenance, while the husqvarna mower steps in for a quick tidy up when needed.
It’s the same as having a chainsaw for larger jobs or a trimmer for edges—every tool has its place. At Nu Tech Mowers, we can help you find the right balance of gear for your lawn and show you how to get the best from both.
Other Tools Worth Maintaining: From Chainsaw to Lawn Mower
While you’re looking after your automower, don’t forget about the rest of your gear. Regular checks on your chainsaw and lawn mower are just as important. A quick look at the fuel, blades, air filters, and spark plugs can prevent issues down the line.
Make it a habit to do seasonal maintenance. That way, everything is ready to go when you need it. At Nu Tech Mowers, we offer full servicing for all types of outdoor tools—so whether it’s your automower, husqvarna, or handheld gear, we’ve got you covered.